35C50
Paint pump
The 35C50 pump is a mid-range, all-purpose pump for medium to high viscosity products. Up to 210 bars of fluid pressure allows Airmix® or Airless applications.
Suction rod or gravity hopper
Available in kits with one or two air regulators
Good chemical compatibility with GT or MB-A cartridges
Description
Technical Data
Equipment
Accessories
Kits
Documents & Media
Technologies
Markets
Performance
1 Quiet and balanced air motor for constant delivery
1 Minimal pulsation due to quick air motor changeover at low air pressures
2 Stainless steel fluid section compatible with a wide range of materials including water-based paints
3 Designed to eliminate dead zones for quick color changes
♦ Pulse-free for a superior finish
♦ Able to flush and prime at very low air pressures (0.6 bar/8.5 psi)
Productivity
3 Large foot valve to handle high viscosity materials up to 5,000 cPs - carbide seat
4 Small fluid section, minimal material loss during color changes
5 Closed construction decreases the risk of injuries and protects the lubricant from external contamination
5 Leak indicator weep hole for fast visual inspection
6 Easily rotatable outlet fitting for various configurations
Sustainability
1 Differential air motor for ice-free operation during prolonged use
3 Direct access to the suction valve allows for easy maintenance
4 Single piece built-in cartridge with no dead zone
6 Easy coupling for a quick disassembling
♦ Mobile seal located on the piston ensures the cleaning of the fluid section internal wall while the pump is in operation
♦ Low maintenance, no external air distributor assembly. 45% fewer parts vs competition
♦ Triple chrome-plated piston parts compatible with most materials
♦ Magnetic reversing valve to eliminate pump surge
♦ Reduced spare parts: 50% fewer parts vs competition
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 20 cycles / mn (gal/min) | 0.26 |
| Fluid Output at 20 cycles / mn (l/min) | 1 |
| Fluid Output at 60 cycles / mn (gal/min) | 0.8 |
| Fluid Output at 60 cycles / mn (l/min) | 3 |
| Free Flow Rate (gal/min) | 1.3 |
| Free Flow Rate (l/min) | 5 |
| Maximum Fluid Output (cc/min) | 3000 |
| Number of cycles per liter of products | 20 |
| Pump displacement (cc/cycle) | 50 |
| Pump displacement (in^3/cycle) | 3 |
| Depth (in) | 9.05 |
| Depth (mm) | 230 |
| Height (in) | 23.6 |
| Height (mm) | 600 |
| Width/depth (in) | 9.05 |
| Width/depth (mm) | 230 |
| Maximum Material Pressure (bar) | 210 |
| Maximum Material Pressure (psi) | 3045 |
| Pressure ratio | 35/1 |
| Air Consumption (m3/h) | 15 |
| Weight (kg) | 12 |
| Weight (lbs) | 26 |
| Maximum Temperature (°C) | 60 |
| Maximum Temperature (°F) | 140 |
| Power Source | Pneumatic |
| Air Inlet Fitting | F3/8" BSP |
| Material Inlet Port | F 1/2" BSPP / M26x125 |
| Material Outlet Port | M 1/2" JIC |
| Wetted Parts | Hard chrome stainless steel, Polyethylene, Stainless steel 303, Tungsten carbide |
| Certification | CE-UKCA II2G Ex h IIB T3 Gb X |
| Motor Type | Differential |
| Pump Type | Cup pump with balls |
| Pumping technology | Cup piston pumps |
| Designation | Part number | Material inlet | Air Regulator fluid pressure | Atomization air regulator | Lower seal | Setup | Suction accessory | Throat seal | Drain Rod | Pump output Filter | Max pressure (bar) | Spray gun | Agitator rod length (in) | Fluid Hose | Capacity (L) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 35C50 F1/2 wo Filter wo Rod | 151148000 | F1/2" BSPP | Yes | Yes | GT | Wall mounted | - | MBA cartridge | |||||||
| 35C50 M26x125 wo Rod wo filter | 151148050 | M26x125 | Yes | Yes | GT | Wall mounted | - | MBA cartridge | |||||||
| 35C50 M26x125 + Rod + Filter | 151148100 | M26x125 | Yes | Yes | GT | Wall mounted | Suction rod ID 23 mm | MBA cartridge | Yes | Yes | |||||
| AIRLESS PUMP 35C50 MBA W/M F1/2 | 151148150 | F1/2" BSPP | Yes | GT | Wall mounted | - | MBA cartridge | ||||||||
| AIRLESS PUMP 35C50 MBA W/M M26x125 | 151148200 | M26x125 | Yes | GT | Wall mounted | - | MBA cartridge | ||||||||
| 35C50 M26x125 + Rod wo Filter | 151148250 | M26x125 | Yes | Yes | GT | Wall mounted | Suction rod ID 23 mm | MBA cartridge | |||||||
| AIRLESS PUMP 35C50 MBA W/M M26x125 SUCTION D25 | 151148300 | M26x125 | Yes | GT | Wall mounted | Suction rod ID 23 mm | MBA cartridge | ||||||||
| AIRLESS PUMP 35C50 MBA W/M M26x125 FILTER + SUCTION D25 | 151148350 | M26x125 | Yes | GT | Wall mounted | Suction rod ID 23 mm | MBA cartridge | Yes | Yes | ||||||
System, 35C50, W/M, C/W Xcite®+ 240, 5G Rod, Filter, 50Ft.
|
668-148-001 | Wall mounted | 240 | Xcite ®+ 240 | 5 | 50Ft. | |||||||||
|
System, 35C50, W/M, C/W Xcite®+ 240, 5G Rod, Filter, 25Ft.
|
668-148-000 | Wall mounted | 240 | Xcite ®+ 240 | 5 | 25Ft. | |||||||||
|
System, 35C50, W/M, C/W Xcite 200, 55G Rod, Filter, 50Ft.
|
668-148-201 | Wall mounted | 200 | Xcite 200 | 55 | 50Ft. | |||||||||
|
System, 35C50, W/M, C/W Xcite 200, 55G Rod, Filter, 25Ft.
|
668-148-200 | Wall mounted | 200 | Xcite 200 | 55 | 25Ft. | |||||||||
|
System, 35C50, C/M, C/W Xcite 200, 6L Hopper, Filter, 50Ft.
|
668-148-103 | Trolley | 200 | Xcite 200 | 50Ft. | 6 | |||||||||
|
System, 35C50, C/M, C/W Xcite 200, 6L Hopper, Filter, 25Ft.
|
668-148-102 | Trolley | 200 | Xcite 200 | 25Ft. | 6 | |||||||||
|
System, 35C50, C/M, C/W Xcite 200, 5G Rod, Filter, 50Ft.
|
668-148-101 | Trolley | 200 | Xcite 200 | 5 | 50Ft. | |||||||||
|
System, 35C50, C/M, C/W Xcite 200, 5G Rod, Filter, 25Ft.
|
668-148-100 | Trolley | 200 | Xcite 200 | 5 | 25Ft. | |||||||||
|
System, 35C50, W/M, C/W Xcite 200, 6L Hopper, Filter, 50Ft.
|
668-148-003 | Wall mounted | 200 | Xcite 200 | 50Ft. | 6 | |||||||||
|
System, 35C50, W/M, C/W Xcite 200, 6L Hopper, Filter, 25Ft.
|
668-148-002 | Wall mounted | 200 | Xcite 200 | 25Ft. | 6 |
| Designation | Part number |
|---|---|
| Wall-mounted totem | 151140240 |
| Essential Stand | 151730130 |
| Single post cart | 151730140 |
| Dismountable trolley | 151241000 |
| Dismountable trolley with drum table | 151242000 |
| Tripod | 151140210 |
| Gravity hopper 6 liters | 151140230 |
| SST Suction rod Ø23 plunging tube length elbowed 570 mm M26x125 | 149596150 |
| SST Suction rod Ø23 plunging tube length 1000mm elbowed (for 200 liters drums) M26x125 | 149596160 |
| Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 |
| Fluid filter Mesh 6 3/8 (Inlet F1/2"JIC - Outlet M1/2"JIC) | 155580600 |
| Air plate with 2 air regulators | 151140070 |
| Air plate with 1 air regulator | 151140060 |
| PUMP AIR EQUIPMENT + AIR 2 GUN MANAGEMENT WO PRODUCT | 151140095 |
| PUMP AIR EQUIPMENT + AIR&PRODUCT 2 GUN MAMANGEMENT MANIFOLD | 151140090 |
| Designation | Part number | Aircap | Details | Spray gun | Tip | Hoses length (mm) | Pump type | Suction accessory | Swivel fitting | Hoses | Whip hose (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PACK 35C50 W/M MBA SUC D25 XCITE®+240 TWIST H7.5+12.114 NO FI | 151148400 | VX124 | MBA cartridge | Xcite®+ 240 | 12-114 | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes | |
| PACK35C50 W/M MBA SUC D25 FILTER XCITE®+240 TWIST H7.5+12.114 | 151148450 | VX124 | MBA cartridge + filter | Xcite®+ 240 | 12-114 | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes | |
| PACK 35C50 2G W/M MBA SUC D25+FIL 2/XCITE®+240+2/09114+2/H7.5 | 151148650 | VX124 | MBA cartridge + filter | 2x Xcite®+ 240 | 09-114 | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes | |
| PACK 35C50 W/M MBA SUC D25 + SFLOW TWIST+12.13 H7.5+1.6 | 151148500 | For reversible tip | MBA cartridge | Sflow™ 275 2F | 12-13 | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes | 1.6 |
| AIRLESS PACK 35C50 MBA W/M FILTER SFLOW™, TIP + HOSES | 151148550 | For reversible tip | MBA cartridge + filter | Sflow™ 275 2F | 12-13 | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes | 1.6 |
Documents PDF
-
product-35C50-Airmix-Paint-Pump_en_GB.pdf
-
product-35C50-Airmix-Paint-Pump_en_US.pdf
Documents Instruction Manuals
-
35C50 | User manual
Documents 3D/2D
-
3D file 35C50
-
3D file 35C50
Linked Products
SFlow® 275
Airmix® technology
Let's get in touch-
What is Airmix®?
Airmix® is a technology, invented in 1975 by Kremlin, combines the advantages of airless spraying and air-assisted spraying to deliver high-quality paint application with improved transfer efficiency and reduced product consumption.
-
What are the benefits of using Airmix®?
Airmix® technology enables the application of thicker paint layers to better protect surfaces, without compromising on finish quality. Its benefits include superior finish quality, high transfer efficiency, lower paint consumption, and fast, uniform application.
-
For which types of projects is Airmix® recommended?
Airmix® technology is ideal for industrial applications where a balance between protective thickness and finish quality is required, such as furniture manufacturing, the transportation industry, and rolling equipment, among others.